Surface Resistivity Meter (9V)
This is an ultra wide-range, battery operated, Potable instrument for measuring surface resistivity of virtually any flat surface. In the circuit industry, products such as packing materials, component storage bags and trays, workbench surfaces, table and floor mats, conveyor belts, etc., have resistance value, which need to confirm to stringent specifications. Moreover, these values are expected to fall within specified limit. The surface Resistivity meter can play a vital role in monitoring and checking the resistivity characteristic of the above items.
It also has unique additional features of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined. The surface resistivity is conveniently indicated by a row of LED’s covering a total of 10 decades from 10^3 to 10^13 Ohms / Sq
Measurement Range : 10^3 to 10^13 Ohms / Sq
Measurement Accuracy : Half decade, Resolution : One decade
Indication : Visual by different color LED’s
Power Supply : 9 Volt Battery, Low Battery : Warning at 7.5V
Dimensions : 135 x 70 x 30 mm, Calibration : Recommended every 12 months.
Warranty : 12 Months, Accessories included : Surface to Ground cord.
Optional : Instrument Carry Case.
Dual Surface Resistivity Meter With Probes
The surface resistivity meter measures both surface resistance and resistance to ground. This is meant for use in evaluating a wide variety of ESD protective materials including table mats, floor mats, and hard ESD laminates. It measures and displays surface resistivity as well as surface to ground and point-to-point resistances. These measurements can be done in the range of < 103 to >1012 Ohms by using two 2.5 kilo (51b) heavy electrodes or through internal probes. To check whether surface resistivity is in accordance with EOS/ESD Association standards S-4.1.
Measurement Range (LCD) : ≤ 1 x 10^3 to ≥ 1 x 10^12 Ohms & Ohms / Sq
Measurement Range (LED) : < 10^3 to > 10^12 Ohms / Sq
Measurement Accuracy (LCD) : 0.1 Decade, Measurement Accuracy (LED) : 0.5 Decade
Probe Voltage : 100V +/- 5%, Battery Indicator : Green when battery is fully charged
Red for low battery
Test actuation : Press To Read, Power Supply : 9V Rech – Battery
Dimensions in mm : 210 x 110 x 40 mm,
Calibration : Calibration recommended once in 12 months
Warranty : 12 Months from the date of manufacturer
Optional : Testing & Measuring probes ESD Audit Kit
Accessories : External cable & 12 V Charger
Wrist strap is the first line of defence against electrostatic charges builds up on the human body. It is designed to carry away this charges as soon as it is generated. At the same time wrist strap must remain electrically safe for the user. Thus, it is important to test every wrist strap regularly.
in order to protect the sensitive electronic components the maximum wrist strap resistance should not be more than 10 meg ohms on the other end. The resistance should not be less than 0. 75 meg ohms as protection to the wearer from dangerous level of the voltage and current flow.
Foot wear is the first line of defense against electrostatic charges builds up on the human body. It is designed to carry away this charge as soon as it is generated. At the same time Foot wear must remain electrically safe for the user. Thus, it is important to test every Foot wears regularly.
In order to protect the sensitive electronic components the maximum foot wear resistance should not be more than 100 Meg ohms on the other end. The resistance should not be less than 0.75 Meg ohms as protection to the wearer from dangerous level of the voltage and current flow.
The foot wear tester checks these parameters under actual operating conditions with the foot wears. It clearly indicates weather or not the resistance of the foot wears system including the wearer is at least 0.75 Meg ohms and note more than 100 Meg ohms respectively.
Specification : Range : Foot wear 0.75 to 100 Meg ohm.
Indications : Pass – Green Led , Low & High Fail – Red Led.
With Audible alarm, Test actuation : By gently pressing metal sensor plate.
Accuracy : +/- 10%
Power Supply : 9 Volt Battery, Low Battery : Warning at 7.0 V
Dimensions : 135 x 70 x 30 mm, Weight : App. 150 Gms with battery.
Calibration : Recommended every 12 months, Warranty : 12 Months.
Optional : Instruction Board, Carry Case & Door Locking System.
The model SCM – 02 static charge meter is a lightweight, precision electrostatic charge meter that features stabilized sensor for accurate measurement. The maximum measurement range is from 0 to 10 KV at meter to object distance of one inch. A 2-1/2-Digit LCD provides 100-Volt resolution with polarity indication.
Measuring Procedure :
Put the ON – OFF switch to ON Position. First press the PRESS
To read switch on the meter, bring the instruments towards the object at one inches now displays reading from the zero to +/-10.0 KV, for example.
Reading x Distance = Static Voltage
2.2 KV 1 Inches 2.2 KV
8.5 KV 1 Inches 8.5 KV
If the value is more (i.e., display shows > 10.0 KV), Release the press to read switch.
Maintenance : This instrument is designed to the completely maintenance free. There are no parts inside which can be replaced by the user himself. In case of malfunction or re-calibration contact manufacture.
Specifications : Measurement Range : +/- 10 KV at 1 Inch
Measurement Accuracy : +/- 10%
Indication : 2 ½ Digit LCD Display
Test Actuation : Press to Read
Power Supply : 9 Volt Battery
Low Battery : Warning at 7.0 Volts
Dimensions : 135 x 70 x 30 mm
Calibration : Recommended every 12 months
Warranty : 12 Months